Degreaser / Mesh Prep & Emulsion Remover SET
 
Set includes :
-250g Degreaser 
-Emulsion Remover Powder for mixing 500ml solution
-"Emulsion Remover" Sticker is included so you can label and reuse your own spray bottle
 
Degreaser / Mesh Prep Instructions:
 
Screens must be degreased prior to applying emulsion.
Only use a little degreaser, apply with a sponge and get it to make a little lather. Wash the degreaser off with copious amounts of water. You need to make sure that the degreaser is completely cleaned out of the mesh. Running the water over the mesh instead of through the mesh is good, that way you can see if there are any areas that are repelling the water.
 
Mesh Prep / Degreaser Advantages:
 
• 100% Biodegradable
• Eliminates fisheyes and streaks in coatings
• Maximizes exposure latitude and adhesion for both emulsion and capillary film stencils
• Optimizes resolution , definition and stencil life
 
Emulsion Remover / Stencil Strip Instructions:
 
1.  Mix powder with 500ml of water, which gives a 2% strong solution designed for rapid removal of stencils
2. Ensure screen is cleaned of ink residue 
3. Rinse with water, apply stencil remover to both sides of screen and leave for 10-15 minutes. DO NOT ALLOW TO DRY
4. Rinse off thoroughly with water, preferably under pressure
5. For old stencils, repeat the procedure
 
Decoating agent colour: White Powder
 
Emulsion remover/ Decoating agent powder offers several advantages:
- Economically priced and kinder to the planet- why ship water?
- Mix only the amount of solution you need
- If you need your solution to be stronger use less water
- "Emulsion Remover" Sticker is included so you can label and reuse your own spray bottle - refill don't landfill!